DROP LEAF KITCHEN CARTWITH BASKETSModel 72265
Parts List(4) 1-1/4” (32mm) Phillips Head #8 Screws(2) Bastion Posts(2) Bastion Nuts(2) Set Screws(2) MSKRU M5/25(4) 5/8 (16mm) #5 pre-pack(4) 5/8 (16
Exploded Base IllustrationExploded Drawer IllustrationWRONG!Post needs to be screwed deeper.WRONG!Post needs to be backed out.CORRECT!Set screw secure
Step 1Assemble DrawerA. Attach the Drawer Back to the Left and Right Drawer Sides with four 1 ¼” (32mm) #8 Screws. Make sure the slots that run the le
Step 2Attach Drawer and Basket Supports to Side PanelsA. Using 1” (25mm) Phillips flat head #8 screw, attach the basket supports to the side panel. B.
Step 3Attach Front and Back BracesA. Tap 3/4” (19mm) steel pins into front and back braces. Align pins with pilot holes on side panels. B. Using 1-3/4
Step 4Attach Hardware and Drop Leaves to TopA. Place the top and 2 drop leaves upside down on a flat surface. Install hinges using 5/8” #6 screws. Fas
Step 6Attach the CastersA.Tap in Caster Sleeves with a hammer, careful not to bend the sleeve teeth. Slide the Casters into the sleeves and give a lig
Step 7Add Bottom ShelfA.Tap 1” (25mm) steel pins into the pilot holes on the bottom front and back braces. Place bottom shelf onto pins. Step 8Insert
Commentaires sur ces manuels