Catskill-craftsmen 51537 Manuel d'utilisateur télécharger pdf (Page 4)

STEP 1

1. Attach the Rack Top to the top ends of the Side Panels (universal: same left/right & top/bottom)

using 1 1/4” #8 wood screws. MAKE SURE YOU HAVE THE RACK TOP! The only difference

between the Rack Top and the Cabinet Top is that the Cabinet Top has 4 small pilot holes on the

bottom side plus the 4 through holes; whereas, the Rack Top only has the 4 through holes.

NOTE: On the Rack Top the countersunk (reamed out) through holes face up and the countersunk

holes/pilot holes on the Cabinet Top face down. The countersunk holes allow the screw heads to be

ush with the wood surface when tightened down.

2. Turn this assembly upside down so that the Rack Top is on a smooth at surface. Attach the

Cabinet Top with four 1 1/4” #8 wood screws. With the unit upside down at this point, the 4 pilot holes

should be up. See illustration 1B.

3. Leave this assembly UPSIDE DOWN and go to STEP 2.

NOTE: The cart cabinet will be constructed upside down

using the bottom of the Cart Top as the base.

1 1/4” Phillips Flat Head #8 Bronze Screw

8 Used in this step

RACK TOP

CABINET TOP

PILOT HOLES HIDDEN

Bronze Screws

CABINET TOP

RACK TOP

ILLUSTRATION 1A

ILLUSTRATION 1B

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Catskill-craftsmen 51537 Manuel d'utilisateur Page 4